Extreme Rage V2 Electric 3 Speed Hopper Modification
Setup and Cables  
Paintball Section : Modifications Page: Extreme Rage Hopper: Setup and Cables
 
In the Original setup done by a person I copied, he took whole bunch of cables and stuffed them into the hopper to protect them. I Decided to mount the board in a project box outside not to limit the capacity of the hopper. I needed everything neatly arranged so I decided to use and IDE tape instead of individual wires. (for those not into computers IDE tape is the flat bunch of wires running to your computers harddrive) IDE cables are pretty durable and carry electricity with very little resistance making it a good choice. To protect them I wrapped them in electrical tape and covered with extra layer of Epoxy nera the Eye Setup, I will post updated pics soon. Remember to break all connections with the switch, in my first attempt I forgot the the IR emmiter was connected separately and it kept draining the battery, so I combined all gorund wires together, run them throught the switch and then to the battery's negative terminal.

Extra Help:

 
All rights reserved, Copyright Nocpan.com 2005, Use of any material found on this website without permission is not allowed.